20 April 2010

A bit about pistol-gripped stocks

Not long ago, I received a Comment from a reader asking if I have ever considered incorporating a full pistol grip as part of the buttstock design in my Faeton rifles. The answer can be seen below in the form of this special request custom rifle.



(Click the pic to enlarge it for closer viewing, then click the Back button to return to the text.)

The customer requested a heavier rifle than my standard-weight Faeton and supplied a rather stout, straight-octagon .58 calibre Getz tube with a medium slow (round ball) twist for this project. The wood chosen was a beautiful stick of quilted Oregon madrone, a dense, fine-grained wood that is similar to maple. He also requested a large shotgun buttplate, a tall blade front sight, and a Sharps-style rear sight. The metal was rust blued using my own proprietary Genuine Weasel Piss rust-browning solution.

Although the pistol grip does add more bulk to the rifle, all in all we were quite pleased with the rather racy result of our walk on the wild side. While not very clear in this photo, the forearm sports a stylized ebony Schnabel tip and sheaths a jet black, Gaboon ebony loading rod with brass tips at both ends.

Sorry for the poor quality of the  photo as it was taken in a hurry as the customer was about to leave my shop. It was a last minute thought to capture the image and all I had was my vintage 35mm film-burner, a Minolta SRT-101. Obviously I didn’t know what I had captured until I developed the film. By then the customer was off to parts unknown and I was never able to get a better photo of the rifle.

However, it does serve as an example of what can be done with the simple bent-cylinder type of underhammer actions when it comes to attaching wood. Being sure of your structural integrity, watch the lines and proportions to keep them pleasing to the eye and you should be okay.

BTW, pistol grips are a traditional underhammer rifle feature having been used by several of the great makers of old, including Billinghurst. So, be brave ye underhammer builders and push the boundaries a bit. Remember, no guts, no glory - just the dull reward of mediocrity.

.

3 comments:

Anonymous said...

Dear Mr. Renner,

Thank you for the quick response to my question. Your design is very similar to what I was thinking of, except that I would prefer a more round bottom grip like a dome instead of the s shaped bottom.

Don't get me wrong, because I do think your rifle is quite handsome. I like the way you shaped the back of the forearm to match the bottom of the grip.

This gives me something to think about because I'm planning an underhammer rifle to be built for me and I think I will use a pistol grip stock.

Thank you again for the quick response. I really enjoy reading this blog and hope that you will keep it up.

D.Hackman
Billings, MT

Anonymous said...

Wow! Nice rifle!
Keep up the great work.

regards,
J. Pacibal

IdeZilla said...

I really like this rifle. Thank You for the pictures!

Please Support our Sponsors

This site is provided to you free of charge by our sponsors. If you find value in our efforts, please take a moment to visit their sites listed below and consider their products and services before buying somewhere else.

If you are interested in advertising your muzzleloading services or products on The Underhammer Society blog site, please call 775-453-9355 for more information.

Thank you for your interest and support.

The Underhammer Society
.

The Gun Works

Rice Barrel Company

Black Widow Bullets

Faeton - The Thinking Man's Rifle

Faeton - The Thinking Man's Rifle
Click the image for more information about RJ Renner rifles

Thanks for visiting!

Copyright 2007 - 2016 by R.J.Renner .

About Me

Roger Renner


Hi. I've been a student, admirer, and designer/builder of underhammer guns for over 30 years. In that span I've built over 200 semi-custom underhammers exploring the possibilities from the ordinary to the exotic. In 1996 I founded Pacific Rifle Company to explore the market's interest in a high-quality underhammer rifle. Thankfully, that interest was, and still is, there. I sold PRC in 2006 but continue to craft high-end underhammers as I am truly afflicted with underhammeritis - which can be contagious!